3 Loading Tips Operators Must Know



You are here: Our news > 3 Loading Tips Operators Must Know

2022-05-31 3 Loading Tips Operators Must Know

Read: 6338

share Copy page link
share Share link to: Facebook | Twitter
3 Loading Tips That Excavator Operators Must Know
Loading is the most basic technology of excavators, and it is also the most test of a driver's technology.
For the same excavator, some people load the truck quickly and save fuel,
and some people grind and chirp when they load it, and they can't do much work in a day.
So, how to improve loading technology?


According to the working scene, excavator loading can be divided into flat loading, high loading and low loading. The three scenarios are different, and the technical difficulty is also different.
Among them, loading on a high platform is relatively simple, while loading on a low platform is more difficult.


Flat loading skills
When loading the truck on the ground, you must first select the station so that the excavator and the dump truck are parallel. A certain distance should be maintained between the excavator and the dump truck. The approximate standard is: when the excavator comes over, the bucket can be positioned above the dump truck, and the angle between the boom and the forearm is about 100 degrees. In this way, the large and small arms can be flexibly displayed, and a safe distance can be maintained between the counterweight of the excavator and the dump truck.


Then you can load the car, no matter from front to back or from back to front, you need to master the rhythm one by one. The bucket needs to be turned from the middle of the back panel of the dump truck every time, and the forearm should be slightly moved when loading the front half to make the material fall in the middle part of the big box. If you are loading sand, you should open the bucket slowly, because the sand is loose, and the sand will start to fall before the bucket is fully opened.


High platform loading skills
High platform loading is that the excavator is at a high place and the dump truck is at a low place, which is the easiest way of loading. This method is labor-saving and high-efficiency, so it is a loading method that is widely preferred by drivers.

The most important thing for high-level loading is to trim the platform. This platform should not be too high. It is best to be close to the height of the dump truck's carriage, so that the excavator can not only see the situation in the carriage, but also accurately place the soil in the right place. Location. During the operation, the excavator should adjust the position at any time, so that the excavator and the dump truck can maintain a proper distance.


The operation of loading on a high platform is relatively simple. When loading, the track should be straightened and the body should be stopped. When loading the vehicle, you should clean up the retreating platform in time for yourself, and always pay attention to the direction of the loading platform to avoid safety accidents.


Low-level loading skills
Low-level loading means that the dump truck is on the flat ground and the excavator is in the low-lying pit. Due to the low position of the excavator, the operator cannot see the situation in the carriage and can only estimate by feeling, so this kind of loading is the most difficult.


Low-level loading generally occurs in work such as digging foundations and dredging. The greater the drop between the excavator's working plane and the ground, the greater the difficulty of loading. When loading, the upper and lower arms should be raised as high as possible to allow the material to slide down as evenly as possible. After the material in the vehicle is piled up, push it back and forth with the bucket, and it can basically be leveled.


Please see more »


Get more information from us

* Please enter your message in the box below:
(* denotes a mandatory field)


Title: *
Name: *
Company: *
Country: *
City*:
Phone
(WhatsApp)Number:
E-Mail: *


Please write the result *

WHY CHOOSE US

OVER 15 YEARS OF SUCCESSFUL SALES ON THE GLOBAL MARKET. THE BEST SELECTION FROM THE MOST RELIABLE MANUFACTURERS.
DIRECT DELIVERY FROM MANUFACTURERS FACTORIES, NO WAITING AND MINIMUM PRICE



MULTIPLE CATEGORY
More than 120 different categories for you to choose from

LARGE STOCK
More than 30,000 vehicles and equipment are waiting for you to stock for immediate delivery

FAST SHIPPING
Fast shipping time to any country in the world. Door to door service is available for each way.

oDM/OEM
Any factory modification to your requirements. Including your logo and/or Pantone colour of choice.

WARRANTY
1-3 year warranty and lifetime technical service and spare parts

CUSTOMIZED SERVICE
Technical Support and friendly service 24/7

ARMY-UK.COM ® latest arrivals

NEW MACHINERY® the best offers

ARMY-UK.COM ® the best construction vehicles

ARMY-UK.COM ® the best UTV and ATV vehicles

ARMY-UK.COM ® military gear and vehicles with promotional price

NEW MACHINERY® LATEST NEWS


HOT SALE
Zoomlion, FOTON, YTO, JIMNA Agricultural farm tractors 4WD.
Compacted structure, short wheel base, small turning radius, fits in small land farming.
Rich equipment, reliability and mobility at low cost.


  READ MORE  
English - Deutsche - French - Dutch - Portuguese - Spanish - Italian - Chinese - Korea - Japan - turkish - Arabic - thai - vietnamese - Hindi - Hindi


Manufacturers: BYD | BMW | BAUDOUIN | DOOSSAN | DONFENG | DEUTZ | SINOTRUK | GAC | HASDER| HAITAI| HENGWANG CATERPILLAR | CUMMINS | CXXM | MAN | JCB | PERKINS | VOLVO | VOLKSWAGEN | SHANTUI | SIHAO | SHACMAN| STAMFORD | WEICHAI | LOVOL | XCMG | TOPMAC | ZOOMLION | FOTON | FOTMA | TAIGUO | TESLA| YTO | JINMA | sitemap.xml for Google

  My Cart


Save any items in your bag and when you're ready, just order.
CLICK HERE